Keywords and phrases: wetted outer surface, finned-tubes, smooth tubes, air-cooled condenser, normal spray, spray-condenser parameters.
Received: November 18, 2022; Accepted: December 20, 2022; Published: January 23, 2023
How to cite this article: Ibra BOP, Ibrahima FALL and Biram DIENG, Determination of the wetted outer surface of a water-sprayed finned-tubes air-cooled condenser: a case of a spray normal to the impact area, JP Journal of Heat and Mass Transfer 31 (2023), 51-62. http://dx.doi.org/10.17654/0973576323005
This Open Access Article is Licensed under Creative Commons Attribution 4.0 International License
References:
[1] Fabien Raoult, Modélisation d’un écoulement diphasique évaporatif le long d’une paroi chauffée, Thèse de Doctorat, Université Sorbonne, 2019. [2] I. Allais, C. Alvarez and D. Flick, Analyse du transfert thermique entre un cylindre et un écoulement d’air faiblement chargé en gouttelettes d’eau, Rev. Gén. Therm. 36 (1997), 276-288. [3] W. Nakayama, H. Kuwahara and S. Hirasawa, Heat transfer from tube banks to air/water mist flow, Int. J. Heat Mass Transf. 31 (1988), 449-460. [4] M. Youbi-Idrissi, H. Macchi-Tejeda, L. Fournaison and J. Guilpart, Numerical model of sprayed air cooled condenser coupled to refrigerating system, Energy Conversion and Management 48 (2007), 1943-1951. [5] J. Tissot, P. Boulet, F. Trinquet, L. Fournaison and H. Macchi-Tejeda, Air cooling by evaporating droplets in the upward flow of a condenser, International Journal of Thermal Sciences 50 (2011), 2122-2131. https://doi:10.1016/j.ijthermalsci.2011.06.004. [6] P. Boulet, J. Tissot, F. Trinquet and L. Fournaison, Enhancement of heat exchanges on a condenser using an air flow containing water droplets, Applied Thermal Engineering 50 (2013), 1164-1173. [7] Ibra BOP, Biram DIENG, Seydou Nourou DIOP and Amadou WARORE, Theoretical investigation of the optimal spray-condenser configuration of a sprayed finned-tube air-cooled condenser: analysis of the intensification factor and water loss spots, International Journal of Engineering Trends and Technology 69(12) (2021), 21-29. doi:10.14445/22315381/IJETT-V69I12P204. [8] M. Arai, M. Tabata, H. Hiroyasu and M. Shimizu, Disintegrating process and spray characterization of fuel jet injected by a diesel nozzle, SAE Technical Paper 840275, 1984. [9] Arnaud FOISSAC, Modélisation des interactions entre gouttes en environnement hostile, Thèse de Doctorat, Université Pierre et Marie Curie, Décembre 2011. [10] Pierre Emmanuel VENDÉ, Incidence de l’implémentation d’un système de pulvérisation de gouttelettes d’eau sur l’efficacité d’un groupe de production de froid embarqué, Thèse de Doctorat, Université Pierre et Marie Curie, Paris, France, 2018, 219 pp. [11] A. Hasan and K. Siren, Performance investigation of plain and finned tube evaporatively cooled heat exchangers, Applied Thermal Engineering 23(3) (2003), 325-340.
|