[1]    M. De Kwaadsteniet, M. Botes and T. E. Cloete, Application of nanotechnology in antimicrobial coatings in the water industry, Nano 6(5) (2011), 395-407.

[2]    J. Chapman, E. Weir and F. Regan, Period four metal nanoparticles on the inhibition of biofouling, Colloids and Surfaces B: Biointerfaces 78(2) (2010),  208-216.

[3]    T. Sullivan and F. Regan, The characterization, replication and testing of dermal denticles of scyliorhinus canicula for physical mechanisms of biofouling prevention, Bioinspiration and Biomimetics 6(4) (2011), 046001.

[4]    A. Whelan and F. Regan, Antifouling strategies for marine and riverine sensors,  J. Environ. Monit. 8(9) (2006), 880-886.

[5]    D. Ellis, New dangerous chemicals in the environment: lessons from TBT, Marine Pollution Bulletin 22(1) (1991), 8-10.

[6]    E. R. Cornelissen, J. S. Vrouwenvelder, S. G. J. Heijman, X. D. Viallefont, D. Van Der Kooij and L. P. Wessels, Periodic air/water cleaning for control of biofouling in spiral wound membrane elements, Journal of Membrane Science 287(1) (2007), 94-101.

[7]    Q. Yu, Y. Zhang, H. Wang, J. Brash and H. Chen, Anti-fouling bioactive surfaces, Acta Biomaterialia 7(4) (2011), 1550-1557.

[8]    J. Milton Harris, Poly (Ethylene Glycol) Chemistry: Biotechnical and Biomedical Applications, Springer, 1992.

[9]    L. Hoipkemeier-Wilson, J. F. Schumacher, M. L. Carman, A. L. Gibson, A. W. Feinberg, M. E. Callow, J. A. Finlay, J. A. Callow and A. B. Brennan, Antifouling potential of lubricious, micro-engineered, PDMS elastomers against zoospores of the green fouling alga ulva (enteromorpha), Biofouling 20(1) (2004), 53-63.

[10]    W. K. Cho, B. Kong and I. S. Choi, Highly efficient non-biofouling coating of zwitterionic polymers: poly ((3-(methacryloylamino)propyl)-dimethyl(3-sulfopropyl)ammonium hydroxide), Langmuir 23(10) (2007), 5678-5682.

[11]    D. J. Balazs, K. Triandafillu, Y. Chevolot, B.-O. Aronsson, H. Harms, P. Descouts and H. J. Mathieu, Surface modification of PVC endotracheal tubes by oxygen glow discharge to reduce bacterial adhesion, Surf. Interface Anal. 35(3) (2003), 301-309.

[12]    J. Chapman, A. Lawlor, E. Weir, B. Quilty and F. Regan, Phthalate doped PVC membranes for the inhibition of fouling, J. Membr. Sci. 365(1-2) (2010), 180-187.

[13]    M. E. Callow and J. E. Callow, Marine biofouling: a sticky problem, Biologist (London) 49(1) (2002), 10-14.

[14]    J. Chapman and F. Regan, Sebacic and succinic acid derived plasticised PVC for the inhibition of biofouling in its initial stages, Journal of Applied Biomaterials and Biomechanics 9(3) (2011), 176-184.

[15]    A. Vachee, D. A. Mossel and H. Leclerc, Antimicrobial activity among pseudomonas and related strains of mineral water origin, J. Appl. Microbiol. 83(5) (1997), 652-658.

[16]    C. L. Tsai, D. J. Schurman and R. L. Smith, Quantitation of glycocalyx production in coagulase-negative staphylococcus, Journal of Orthopaedic Research 6(5) (1988), 666-670.

[17]    G. L. Peterson, A simplification of the protein assay method of Lowry et al. which is more generally applicable, Anal. Biochem. 83(2) (1977), 346-356.

[18]    M. Dubois, K. Gilles, J. Hamilton, P. Rebers and F. Smith, Colorimetric method for determination of sugars and related substances, Anal. Chem. 28(3) (1956), 350-356.

[19]    A. Scardino, H. Zhang, D. Cookson, R. Lamb and R. de Nys, The role of nano-roughness in antifouling, Biofouling 25(8) (2009), 757-767.

[20]    C. E. Wilkes, J. W. Summers, C. A. Daniels and M. T. Berard, PVC Handbook, Hanser Gardner Publications, 2005.

[21]    Y. Zhang, J. Tian, H. Liang, J. Nan, Z. Chen and G. Li, Chemical cleaning of fouled PVC membrane during ultrafiltration of algal-rich water, Journal of Environmental Sciences 23(4) (2011), 529-536.

[22]    M. Seguchi, Model experiments on hydrophobicity of chlorinated starch and hydrophobicity of chlorinated surface protein, Cereal Chem. 62 (1985), 166-169.

[23]    A. Ellison and W. Zisman, Wettability of halogenated organic solid surfaces, J. Phys. Chem. 58(3) (1954), 260-265.

[24]    J. Määttä, H.-K. Koponen, R. Kuisma, H.-R. Kymäläinen, E. Pesonen-Leinonen, A. Uusi-Rauva and K.-R. Hurme, Effect of plasticizer and surface topography on the cleanability of plasticized PVC materials, Appl. Surf. Sci. 253(11) (2007), 5003-5010.

[25]    K. Triandafillu, D. J. Balazs, B. O. Aronsson, P. Descouts, P. Tu Quoc, C. van Delden, H. J. Mathieu and H. Harms, Adhesion of pseudomonas aeruginosa strains to untreated and oxygen-plasma treated poly(vinyl chloride) (PVC) from endotracheal intubation devices, Biomaterials 24(8) (2003), 1507-1518.

[26]    K. Boussu, B. Van der Bruggen, A. Volodin, J. Snauwaert, C. Van Haesendonck and C. Vandecasteele, Roughness and hydrophobicity studies of nanofiltration membranes using different modes of AFM, J. Colloid Interface Sci. 286(2) (2005), 632-638.

[27]    K. A. Whitehead, T. Deisenroth, A. Preuss, C. M. Liauw and J. Verran, The effect of surface properties on the strength of attachment of fungal spores using AFM perpendicular force measurements, Colloids and Surfaces B: Biointerfaces 82(2) (2011), 483-489.

[28]    Y. Rahmawan, K. J. Jang, M. W. Moon, K. R. Lee and K. Y. Suh, Anti-biofouling coating by wrinkled, dual-roughness structures of diamond-like carbon (DLC), Biochip J. 3 (2009), 143-150.

[29]    A. Nakajima, K. Hashimoto and T. Watanabe, Recent studies on super-hydrophobic films, Monatshefte für Chemie/Chemical Monthly 132(1) (2001), 31-41.

[30]    M. Miwa, A. Nakajima, A. Fujishima, K. Hashimoto and T. Watanabe, Effects of the surface roughness on sliding angles of water droplets on superhydrophobic surfaces, Langmuir 16(13) (2000), 5754-5760.

[31]    Z. Yoshimitsu, A. Nakajima, T. Watanabe and K. Hashimoto, Effects of surface structure on the hydrophobicity and sliding behavior of water droplets, Langmuir 18(15) (2002), 5818-5822.

[32]    A. Marmur, The lotus effect: superhydrophobicity and metastability, Langmuir 20(9) (2004), 3517-3519.

[33]    E. Neyens, J. Baeyens, R. Dewil and B. De heyder, Advanced sludge treatment affects extracellular polymeric substances to improve activated sludge dewatering, Journal of Hazardous Materials 106(2-3) (2004), 83-92.

[34]    W. Z. Tang and F. Wang, Quantitative structure activity relationship (QSAR) of chlorine effects on E(LUMO) of disinfection by-product: chlorinated alkanes, Chemosphere 78(7) (2010), 914-921.

[35]    M. Simões, M. O. Pereira and M. J. Vieira, Effect of mechanical stress on biofilms challenged by different chemicals, Water Research 39(20) (2005), 5142-5152.

[36]    J. Paul, W. Jeffrey and J. Cannon, Production of dissolved DNA, RNA, and protein by microbial populations in a florida reservoir, Appl. Environ. Microbiol. 56(10) (1990), 2957-2962.

[37]    J. Scullion and A. Malik, Earthworm activity affecting organic matter, aggregation and microbial activity in soils restored after opencast mining for coal, Soil Biol. Biochem. 32(1) (2000), 119-126.

[38]    J. P. Maréchal and C. Hellio, Challenges for the development of new non-toxic antifouling solutions, International Journal of Molecular Sciences 10(11) (2009), 4623-4637.

[39]    M. Smith and M. McCully, Enhancing aniline blue fluorescent staining of cell wall structures, Biotechnic and Histochemistry 53(2) (1978), 79-85.

[40]    J. Chapman and F. Regan, Nanofunctionalized superhydrophobic antifouling coatings for environmental sensor applications - advancing deployment with answers from nature, Advanced Engineering Materials 14(4) (2012), B175-B184.